New Delta 46-460 variable speed lathe
This has been a great lathe to turn on. I really like the variable speed. Normally I run in the #2 belt position and then vary the speed in that range. I have put this lathe through all kinds of work and it has held up well. As you can see from the pictures below I have turned many large maximum size bowls on this lathe. For some of the bigger ones out of balance I did go to the lower range and had no problems slowing the lathe down for the off balanced blanks. I can recommend this lathe to anyone wanting a midi size lathe, it will do what you need.
Day 143-145
Day 146-148
Day 149-151
Day 152-154
Day 155-157
Day 158-160
Day 161-163
Day 164-166
Day 167-169
Day 170-172
Day 173-175
Day 176-178
Day 179-181
Day 182-184
Day 185-187
Day 188-190
Day 191-193
Day 194-196
Day 197-199
Day 200-202
Day 203-205
Day 206-208
Day 209-211
Day 212-214
Day 215-217
Day 218-220
Day 221-223
Day 224-226
Day 227 -229
Day 230-232
Day 233 -235
Day 236-238
Day 239-241
Day 242 -244
Day 245 -247
Day 248-250
Day 251-253
Day 254-256
Day 257-259
Day 260-262
Day 263-265
Day 266-268
Day 269-271
Day 272-274
Day 275-277
Day 278-280
Day 281
Day 282-284
Day 285-287
Day 288-290
Day 291-293
Day 294-296
Day 297-298
Day 299-301
Day 302-304
Day 305 -307
Day 308 -310
Day 311 - 313
Day 314 - 316
Day 317 - 319
Day 320 - 322
Day 323 -325
Day 326 -328
Day 329 -331
Day 332 -334
Day 335 -337
Day 338 -340
Day 341 -343
Day 344 - 346
Day 347 - 349
Day 350 -352
Day 353 -355
Day 356 - 358
Day 359 -361
Day 362 -364
Now I am using the Mcnaughton coring system with the mini blades to core bowls on the lathe.
Day 365 - 367
Day 368 -370
Day 371 -373
Day 374 -376
Day 377 -379
Day 380 - 382
Day 383 -385
Day 386 -388
Day 389 - 391
Day 392 -394
Day 395 -397
Day 398 - 400
Day 401 -403
Day 404 -406
Day 407 -409
Day 410 - 412
Day 413 -415
Day 416 -418
Day 419 -421
Day 422 -424
Day 425 - 427
Day 428 -430
Day 431 - 433
Day 434 -436
Day 437 - 439
Day 440 - 442
Day 443 -445